DE
EN
Products from Schnitz- und Bildhauerschule Geisler-Moroder
No results were found for the filter!
Die gesamte außenliegende Oberfläche ist mit feinkörnigem CBN beschichtet. Das Werkzeug ist konzipiert zum Abziehen von Schnitz- und Drechselwerkzeugen.Durch seine 145x40 mm große Außenfläche ergeben sich universelle...
€22.70
*
With free fitting eye. (Not suited for LED) Polyester eyes in various colors to choose from.
€24.90
*
Maß- und Preisabweichungen, da es sich hier um Unikate handelt! Maße ca. 10,5 cm x 10,5 cm x 4 cm
€9.50
*
Maß- und Preisabweichungen, da es sich hier um Unikate handelt! Maße ca. 13 cm x 13 cm x 4 cm
€12.50
*
Amsterdam-Acrylfarbe ist ein 100%-iges Acrylat, was eine hohe Haltbarkeit der Farbschicht gewährleistet. Deshalb eignet sie sich insbesondere auch für Bemalungen im Außenbereich. Amsterdam-Acryl ist für alle fettfreien Oberflächen...
From €8.80
*
New "PRO-TEK" version of the high-quality SuperNOVA2 chuck from TEKNATOOL. With new 50 mm "PRO-TEK" pliers, suitable for lathes with direct spindle thread M33 x 3,5. Consisting of: SuperNOVA2 chuck body with "PRO-TEK" coating and ASR...
€179.10
*
€199.00
*
Ribbed interior. Ideal for clamping square and round wood pieces during flying turning, replaces drive-in collet. For heavy bowls up to 750 mm. Clamp area (wood dimensions): Expands: 52– 70 mm Clamps: 32 – 49 mm Fits TEKNATOOL jaw chuck...
€59.50
*
The pincer with the "long nose"! Various applications esp. long workpieces. Clamp area (wood dimensions): Expands: 54 – 70 mm Clamps: 46 – 58 mm FitsTEKNATOOL jaw collet type: SuperNOVA2 and Nova TITAN
€83.90
*
For bowls with large diameters. Swallowtail inside and outside. For spreading and clamping large and heavy bowls up to 750 mm. Clamp area (wood dimensions): Expands: 127 – 140 mm Clamps: 110 – 127 mm Fits TEKNATOOL jaw chuck type:...
€75.80
*
With spring tip! This type is has been proven for longer woodwork and is used in industrial turning. The numerous tips ad the spring tips, workpieces can be mounted carefully and with gently. Contains: • Morse taper MK2 (or MK3) •...
€119.00
*
MK2 Taper With spring tip! This type is has been proven for longer woodwork and is used in industrial turning. 2x ballbearing! High quality. Contains: • rotating live center with standard tip • Attachments 24 and 34 mm with compression ring
€129.00
*
Built solidly, with wood thread screw and drill holes for additional securing of the workpiece. The screw can be dismounted as needed. D = 70 mm. connection thread M33 x 3,5!
€79.90
*
- 2 components (A+B) - to be mixed 1:1 - the mass is water-restistant, frost-proof, die Massen sind wasserfest, frostsicher, non-dwindling, and non-toxic - the material is a mix of chalk and epoxy resin - cling to and connect almost all...
From €91.60
*
Verfügbare Stichbreiten siehe Ausführung. - handgeschliffene Schneide - fein ausgeschliffen und poliert - gebrauchsfertig - Lieferung mit Heft im Kunststoff-Etui
€60.04
*
Viewed